| VH-600A | VH-800A | VH-1000A | VH-1100A | VH-1300A |
|---|
| Travels for 3-axes |
|---|
| X-axis Travel | mm | 610 | 800 | 1000 | 1100 | 1300 |
| Y-axis Travel | mm | 450 | 540 | 540 | 610 | 610 |
| Z-axis Travel | mm | 510 | 525 | 525 | 600 | 600 |
| Spindle nose to worktable surface | mm | 85~595 | 100~625 | 100~625 | 85~685 | 85~685 |
| Spindle center to Z rail surface | mm | 490 | 570 | 570 | 655 | 655 |
| Table surface to floor | mm | 940 | 970 | 970 | 1030 | 1030 |
| Spindle |
|---|
| Spindle Speed | RPM | 12000 | 12000 | 12000 | 12000 | 12000 |
| Automatic Tool Changing System |
|---|
| Number of Tools | T | 24 | 24 | 24 | 24 | 24 |
| Max. tool length | mm | 200 | 300 | 300 | 300 | 300 |
| Max. tool weight | kg | 7 | 7 | 7 | 7 | 7 |
| Tool changing method | | ARM | ARM | ARM | ARM | ARM |
| Tool specification | | BBT-40 | BBT-40 | BBT-40 | BBT-40 | BBT-40 |
| Motor |
|---|
| Spindle motor | kw | 11/15 | 11/15 | 11/15 | 15/18.5 | 15/18.5 |
| Motors on X/Y/Z-axis | kw | 3 / 3 / 4 | 3 / 3 / 4 | 3 / 3 / 4 | 4 / 4 / 4 | 4 / 4 / 4 |
| Worktable |
|---|
| Worktable area | mm | 700×450 | 950×520 | 1150×520 | 1200×600 | 1420×600 |
| Worktable max. load capacity | kg | 350 | 500 | 500 | 1000 | 1000 |
| T-slot Width | mm | 18 | 18 | 18 | 18 | 18 |
| T-slot No. | No | 5 | 5 | 5 | 5 | 5 |
| T-slot Distance from the center | mm | 80 | 100 | 100 | 100 | 100 |
| Rapid Speed |
|---|
| X-axis rapid speed | M/min | 60 | 60 | 60 | 48 | 48 |
| Y-axis rapid speed | M/min | 60 | 60 | 60 | 48 | 48 |
| Z-axis rapid speed | M/min | 30 | 30 | 30 | 24 | 24 |
| Controller |
|---|
| FANUC | FANUC | 0i-MF PLUS 3 | 0i-MF PLUS 3 | 0i-MF PLUS 3 | 0i-MF PLUS 3 | 0i-MF PLUS 3 |
| Miscellaneous |
|---|
| Machine Weight | kg | 4620 | 6700 | 7000 | 7300 | 7600 |
| Coolant Tank Capacity | L | 275 | 355 | 370 | 440 | 460 |
| Power Consumption | KVA | 25 | 25 | 25 | 35 | 35 |
| Compressed air source | kg/cm² | 6 | 6 | 6 | 6 | 6 |
