| Travel |
|---|
| Travel, X/Y/Z | mm | 1000/850/950 |
| Spindle Center To Pallet Face | mm | 60-910 |
| Spindle Nose To Pallet Center | mm | 150-1100 (215-1100)* |
| Pallet |
|---|
| Pallet Size | mm | 800 x 800 |
| Maximum Workpiece | mm | Ø1000 |
| Maximum Pallet Load | kg | 1000 |
| Maximum Workpiece Height | mm | 1000 |
| Pallet Surface Configuration | mm | 24-M16 Pitch 160 |
| Pallet Indexing | | 1° |
| Spindle |
|---|
| Spindle Max. Speed | rpm | 10000 |
| Low/Hight Gear Variation | rpm | 1500 |
| Spindle Max. Torque | N-m | 165 |
| Spindle Taper | | 7/24 Taper,NO.40 |
| Spindle Bearing Id | mm | 70 |
| Spindle Transmission | | Direct (Belt Type+ZF) |
| Feed Rate |
|---|
| Max. X/Y/Z Rapid Speed | mm/min | 32000 |
| Cutting Feed Rate | mm/min | 1-10000 |
| Job Feed Rate | mm/min | 1260 |
| Automatic Tool Change (ATC) |
|---|
| Type Of Tool Shank | | ISO 40 or NBT- 40 |
| Tool Capacity | one of a pair | 60 |
| Max. Tool Diameter (Without Adjacent Tool) | mm | 80(160) |
| Max. Tool Length | mm | 450 |
| Max. Tool Weight | kg | 8 |
| ATC Changing Time(T to T) | sec. | 5 |
| Tool Selection Method | | fixed Address |
| Automatic Pallet Changer (APC) |
|---|
| Number of Pallets | one of a pair | 2 |
| Pallet Changing Type | | Rotary Type |
| Time For APC | sec. | 18 |
| Controller System |
|---|
| FANUC | | 0i-MD |
| Motor |
|---|
| Spindle Motor, Power | kw | 22/26 |
| Spindle Motor | N.m | 165 |
| X/Y/Z/B Axis Motor | kw | 7/7/7/3 |
| Motor, Hydraulic System | kw | 2.2 |
| Motor, Coolant Pump System | kw | 1.6 |
| Power Supply |
|---|
| Power Requirement | KVA | 42 |
| Capacity Of Oil/Coolant Tank |
|---|
| Capacity, Hydraulic System | L | 60 |
| Capacity, Lubrication System | L | 4 |
| Capacity, Coolant System | L | 800 |
| Mechanical Specifications |
|---|
| Height | mm | 3362 |
| Floor Area | mm | 5966 x 3470 |
| Weight | kg | 23000 |
