| Travel |
|---|
| Travel, X/Y/Z | mm | 1300/1200/1200 |
| Spindle Center To Pallet Face | mm | 80-1280 |
| Spindle Nose To Pallet Center | mm | 200-1400 (285-1400)* |
| Pallet |
|---|
| Pallet Size | mm | 1000 x 1000 |
| Maximum Workpiece | mm | Ø1300 |
| Maximum Pallet Load | kg | 2000 |
| Maximum Workpiece Height | mm | 1300 |
| Pallet Surface Configuration | mm | 48-M20 Pitch 125 |
| Pallet Indexing | | 1° |
| Spindle |
|---|
| Spindle Max. Speed | rpm | 6000 |
| Low/Hight Gear Variation | rpm | 1500 |
| Spindle Max. Torque(標準) | N-m | 660 |
| Spindle Taper | | 7/24 Taper,NO.50 |
| Spindle Bearing Id | mm | 100 |
| Spindle Transmission | | ZF Gear Box + Belt Transmission |
| Feed Rate |
|---|
| Max. X/Y/Z Rapid Speed | mm/min | 32000 |
| Cutting Feed Rate | mm/min | 1-10000 |
| Job Feed Rate | mm/min | 1260 |
| Automatic Tool Change (ATC) |
|---|
| Type Of Tool Shank | | ISO 50 or NBT- 50 |
| Tool Capacity | 只 | 60 |
| Max. Tool Diameter (Without Adjacent Tool) | mm | 125(250) |
| Max. Tool Length | mm | 600 |
| Max. Tool Weight | kg | 30 |
| ATC Changing Time (T to T) | 秒 | 8 |
| Tool Selection Method | | fixed Address |
| Automatic Pallet Changer (APC) |
|---|
| Number Of Pallets | 只 | 2 |
| Pallet Changing Type | | Rotary Type |
| Time For APC | 秒 | 18 |
| Controller System |
|---|
| FANUC | | 0i-MD |
| Motor |
|---|
| Spindle Motor, Power | kw | 22/26 |
| 主軸馬達扭力 | N.m | 165 |
| X/Y/Z/B Axis Motor | kw | 7/6/7/3 |
| Motor, Hydraulic System | kw | 3.7 |
| Motor, Coolant Pump System | kw | 1.6 |
| Power Supply |
|---|
| Power Requirement | KVA | 42 |
| Capacity Of Oil/Coolant Tank |
|---|
| Capacity, Hydraulic System | L | 60 |
| Capacity, Lubrication System | L | 4 |
| Capacity, Coolant System | L | 850 |
| Mechanical Specifications |
|---|
| Height | mm | 3948 |
| Floor Area | mm | 6991 x 4326 |
| Weight | kg | 25000 |
