| Travel |
|---|
| Travel, X/Y/Z | mm | 1300/1200/1200 |
| Spindle Center To Pallet Face | mm | 100-1300 |
| Spindle Nose To Pallet Center | mm | 200-1400 |
| Pallet |
|---|
| Pallet Size | mm | 800×800 |
| Maximum Workpiece | mm | Ø 1300 |
| Maximum Pallet Load | kg | 2000 |
| Maximum Workpiece Height | mm | 1300 |
| Pallet Surface Configuration | mm | 24-M16 Pitch 160 |
| Pallet Indexing | | 1° |
| Spindle |
|---|
| Spindle Max. Speed | RPM | 6000 |
| Low/Hight Gear Variation | RPM | 1500 |
| Spindle Max. Torque ( Standard ) | N-m | 660 |
| Spindle Taper | | 7/24 Taper , NO.50 |
| Spindle Bearing Id | mm | 100 |
| Spindle Transmission | | ZF Gear Box + Belt Transmission |
| Feed Rate |
|---|
| Max. X/Y/Z Rapid Speed | mm/min | 32000 |
| Cutting Feed Rate | mm/min | 1-10000 |
| Job Feed Rate | mm/min | 1260 |
| Automatic Tool Change (ATC) |
|---|
| Type Of Tool Shank | | ISO 50 or BBT-50 |
| Tool Capacity | one of a pair | 60 |
| Max. Tool Diameter (Without Adjacent Tool) | mm | 125(250) |
| Max. Tool Length | mm | 600 |
| Max. Tool Weight | kg | 30 |
| ATC Changing Time ( T to T ) | sec. | 8 |
| Tool Selection Method | | fixed Address |
| Automatic Pallet Changer (APC) |
|---|
| Number of Pallets | one of a pair | 2 |
| Pallet Changing Type | | Rotary Type |
| Time For Apc | sec. | 18 |
| Controller System |
|---|
| FANUC | | 0i-MF |
| Motor |
|---|
| Spindle Motor, Power | KW | 22/26 |
| Spindle Moto | N.m | 165 |
| X/Y/Z/B Axis Motor | KW | 7 / 6 / 7 / 3 |
| Motor, Hydraulic System | KW | 3.7 |
| Motor, Coolant Pump System | KW | 1.6 |
| Power Supply |
|---|
| Power Requirement | KVA | 42 |
| Capacity Of Oil/Coolant Tank |
|---|
| Capacity, Hydraulic System | L | 60 |
| Capacity, Lubrication System | L | 4 |
| Capacity, Coolant System | L | 850 |
| Mechanical Specifications |
|---|
| Height | mm | 3948 |
| Floor Area | mm | 6991×4326 |
| Weight | kg | 25000 |
