| Travel |
|---|
| Travel, X/Y/Z | mm | 700 / 650 / 650 |
| Spindle Center To Pallet Face | mm | 50-700 |
| Spindle Nose To Pallet Center | mm | 150 – 800 |
| Pallet |
|---|
| Pallet Size | mm | 500 x 500 |
| Maximum Workpiece | mm | Ø 700 |
| Maximum Pallet Load | kg | 500 |
| Maximum Workpiece Height | mm | 800 |
| Pallet Surface Configuration | mm | 24-M16 Pitch 100 |
| Pallet Indexing | | 1° |
| Spindle |
|---|
| Spindle Max. Speed | RPM | 10000 |
| Low/Hight Gear Variation | RPM | 6000 |
| Spindle Max. Torque ( Standard ) | N-m | 120 |
| Spindle Taper | | 7/24 Taper , NO.40 |
| Spindle Bearing Id | mm | 70 |
| Spindle Transmission | | Direct |
| Feed Rate |
|---|
| Max. X/Y/Z Rapid Speed | mm/min | 36000 |
| Cutting Feed Rate | mm/min | 1-10000 |
| Job Feed Rate | mm/min | 1260 |
| Automatic Tool Change (ATC) |
|---|
| Type Of Tool Shank | | ISO 40 or BBT-40 |
| Tool Capacity | one of a pair | 60 |
| Max. Tool Diameter (Without Adjacent Tool) | mm | 80 ( 160 ) |
| Max. Tool Length | mm | 380 |
| Max. Tool Weight | kg | 8 |
| ATC Changing Time ( T to T ) | sec. | 5 |
| Tool Selection Method | | Fixed Address |
| Automatic Pallet Changer (APC) |
|---|
| Number of Pallets | one of a pair | 2 |
| Pallet Changing Type | | Rotary Type |
| Time For Apc | sec. | 18 |
| Controller System |
|---|
| FANUC | | 0i-MF |
| Motor |
|---|
| Spindle Motor, Power | KW | 15 / 18.5 |
| Spindle Motor | N.m | 120 |
| X/Y/Z/B Axis Motor | KW | 7 / 7 / 4 / 1.6 |
| Motor, Hydraulic System | KW | 2.2 |
| Motor, Coolant Pump System | KW | 1.6 |
| Power Supply |
|---|
| Power Requirement | KVA | 42 |
| Capacity Of Oil/Coolant Tank |
|---|
| Capacity, Hydraulic System | L | 60 |
| Capacity, Lubrication System | L | 4 |
| Capacity, Coolant System | L | 760 |
| Mechanical Specifications |
|---|
| Height | mm | 2980 |
| Floor Area | mm | 5000 x 3200 |
| Weight | kg | 15000 |
