| Travel |
|---|
| Travel, X/Y/Z | mm | 460 / 460 / 350 |
| Spindle Center To Pallet Face | mm | 60 – 520 |
| Spindle Nose To Pallet Center | mm | 60 – 410 |
| Pallet |
|---|
| Pallet Size | mm | 320 x 320 |
| Maximum Workpiece | mm | Ø 430 |
| Maximum Pallet Load | kg | 250 |
| Maximum Workpiece Height | mm | 550 |
| Pallet Surface Configuration | mm | 8 – M12 Pitch 100 |
| Pallet Indexing | | 0.001 ˚ |
| Spindle |
|---|
| Spindle Max. Speed | RPM | 15000 |
| Spindle Max. Torque ( Standard ) | N-m | 70 |
| Spindle Taper | | 7 / 24 Taper , No.30 |
| Spindle Bearing Id | mm | 45 |
| Spindle Transmission | | Direct Drive |
| Feed Rate |
|---|
| Max. X/Y/Z Rapid Speed | mm / min | 48000 |
| Cutting Feed Rate | mm / min | 1 – 12000 |
| Job Feed Rate | mm / min | 1260 |
| Automatic Tool Change (ATC) |
|---|
| Type Of Tool Shank | | BBT – 30 |
| Tool Capacity | one of a pair | 30 |
| Max. Tool Diameter (Without Adjacent Tool) | mm | 60 ( 100 ) |
| Max. Tool Length | mm | 210 |
| Max. Tool Weight | kg | 5 |
| Tool Selection Method | | Random |
| utomatic Pallet Changer (APC) |
|---|
| Number of Pallets | one of a pair | 2 |
| Pallet Changing Type | | Rotary |
| Time For APC | sec. | 10 |
| Controller |
|---|
| FANUC | | 0i-MD |
| Motor |
|---|
| Spindle Motor, Power | KW | 7.5 / 11 |
| Spindle Motor | N.m | 17.9 / 47.7 |
| X/Y/Z/B Axis Motor | KW | 2.7 / 4.5 / 2.7 / 1.6 |
| Motor, Hydraulic System | KW | 1.5 |
| Motor, Coolant Pump System ( Punching ) | KW | 1.5 |
| Power Supply |
|---|
| Power Requirement | KVA | 25 |
| Capacity Of Oil/Coolant Tank |
|---|
| Capacity, Hydraulic System | L | 50 |
| Capacity, Lubrication System | L | 2 |
| Capacity, Coolant System | L | 300 |
| Mechanical Specifications |
|---|
| Height | mm | 2270 |
| Floor Area (+ Chip Conveyor) | mm | 3530 x 2210 ( 3056 ) |
| Weight | kg | 7000 |
