Horizontal Machining Center LH-1250
SKU: LH-1250
Category: Machining Center
| Travel | ||
|---|---|---|
| Travel, X/Y/Z | mm | 2100/1235/1500 |
| Spindle Center To Pallet Face | mm | 80-1335 |
| Spindle Nose To Pallet Center | mm | 318-1815(*450-1815) |
| Pallet | ||
| Pallet Size | mm | 1250 x 1250 |
| Maximum Workpiece | mm | ¢2000 |
| Maximum Pallet Load | kg | 5000 |
| Maximum Workpiece Height | mm | 1500 |
| Pallet Surface Configuration | mm | 80-M20 tapped holes Pitch 125 |
| Pallet Indexing | 1° | |
| Spindle | ||
| Spindle Max. Speed | RPM | 6000 |
| Low/Hight Gear Variation | RPM | 1500 |
| Spindle Max. Torque | N-m | 660 |
| Spindle Taper | 7/24 Taper,NO.50 | |
| Spindle Bearing Id | mm | 100 |
| Spindle Transmission | ZF Gear Box + Belt Transmission | |
| Feed Rate | ||
| Max. X/Y/Z Rapid Speed | mm/min | 24000 |
| Cutting Feed Rate | mm/min | 1-10000 |
| Job Feed Rate | mm/min | 1260 |
| Automatic Tool Change (ATC) | ||
| Type Of Tool Shank | ISO 50 or NBT-50 | |
| Tool Capacity | one of a pair | 60 |
| Max. Tool Diameter (Without Adjacent Tool) | mm | 125(250) |
| Max. Tool Length | mm | 600 |
| Max. Tool Weight | kg | 30 |
| ATC Changing Time (T to T) | sec. | 8 |
| Tool Selection Method | Fixed Address | |
| Automatic Pallet Changer (APC) | ||
| Number of Pallets | one of a pair | 2 |
| Pallet Changing Type | Inclined Shuttle-Type | |
| Time For APC | sec. | 26 |
| Controller System | ||
| FANUC | 0i | |
| Motor | ||
| Spindle Motor, Power | KW | 22/26 |
| X/Y/Z/B Axis Motor | KW | 7/6/7/4 |
| Motor, Hydraulic System | KW | 3.7 |
| Motor, Coolant Pump System | KW | 1.6 |
| Power Supply | ||
| Power Requirement | KVA | 65 |
| Capacity Of Oil/Coolant Tank | ||
| Capacity, Hydraulic System | L | 60 |
| Capacity, Lubrication System | L | 4 |
| Capacity, Coolant System | L | 840 |
| Mechanical Specifications | ||
| Height | mm | 4013 |
| Floor Area | mm | 8410 x 5850 |
| Weight | kg | 35000 |
